Please wait, I'm coming over...
//show loading message
 |
|
|
Last Changed 4/18/2016 |
||
 |
We added a Winegard Trav'ler SK-1000 to Joey. We are added cabling so we can use a ground tripod if necessary. |
|
click on images to enlarge |
||
After we had the Winegard Trav'ler auto-satellite dish installed, we modified it to work with a Hopper 3. This covered in Hopper 3. |
||
 |
This is a schematic of how a Hopper 3 and a Joey will be connected in Joey. | |
click on images to enlarge |
||
 |
Here is Joey at Camping World after the Winegard dish was installed. | |
 |
Here is the Winegard Trav'ler on Joey's roof in the retracted position. | |
click on images to enlarge |
||
 |
Here is the Hopper 3 and both Joeys mounted behind the bedroom TV. We wound up with a lot of equipment in the cabinet. We adapted a power strip to clean up the cabling in Custom Power Strip. |
|
click on images to enlarge |
||
Disclaimer: The information in this site is a collection of data we derived from the vendors and from our personal experiences. This information is meant as a learning guide for you to make your own decisions Best practices and code should always be followed. The recommendations we make are from our personal experiences and we do not receive any compensation for those recommendations. |