Javascript Menu by Deluxe-Menu.com

Cable Making

Last Changed 2/11/2007

Cable Making

Crimp Tool We had a lot of the equipment needed to make cables left over from the boating days. A large cable crimper was a major tool.  These cost about $30 but the ability to make custom battery cables is well worth it.  This one by Ancor Marine uses a large hammer to crimp the cable lug.  2/0 cables are enough to deal with without having extra length.  You can have custom battery cables made if you don't want the tool investment.
Heat Gun Another useful tool that we had was a heat gun.  A heat gun does a great job in shrinking the heat shrink tubing we use on terminal lugs.  In previous days, we used to use the element barrel of the soldering iron to shrink the tubing but the contact with the element caused the tubing to get brown spots.  The heat gun gives use clean well fitted covering of the lug joints.

You could solder or crimp the lugs for your cables.  For more information on the choice click here.


Disclaimer: The information in this site is a collection of data we derived from the vendors and from our personal experiences.  This information is meant as a learning guide for you to  make your own decisions  Best practices and code should always be followed.  The recommendations we make are from our personal experiences and we do not receive any compensation for those recommendations.
//hide content //hide loading message